Print Friendly

Specifications

System Type
  • High Performance
  • Industrial
  • Heavy Duty
  • Modular
Maximum Hoses and Guns
  • 4 Hoses and 4 Guns
Tank Type
  • Extruded Aluminum
  • Melt-On-Demand
  • Modular / Interchangeable
  • Release Coated
Melt Tank Capacities
  • 25 lbs., 35 lbs., 50 lbs., 85 lbs.
  • 135 lbs., 200 lbs.
  • Special Tanks
Tank Heaters
  • Interchangeable Cartridge Type
  • Serviceable
Melt Rate*
  • Up to 90 lbs. / hour
Motor Type
  • Fractional HP
  • Constant Speed
  • Variable Speed
Pumps
  • Steel Spur Gear
  • Positive Displacement
  • 12.7cc per rev.
  • 1230psi (85bar)
Pump Rate*
  • Up to 150 lbs. / hour
Viscosity Limits*
  • Up to 1,000,000 cps

Standard Control Features

Temperature Readout
  • Front Panel Display
  • Run Temp
  • Push-to-See Set Point
  • Readout in F° or C°
Run Temperature Range
  • 100°F-475°F, ±1°F
High Limit of Set Point
  • Front Panel Display
  • Adjustable, 250° F – 475° F
Hose / Gun Controls
  • Front Panel On/Off Switches
  • Up to 4 Hoses and 4 Guns
Pump / Motor Controls
  • Front Panel On/Off Switches
  • Up to 2 Pump/Motor Assemblies
Zone Diagnostics
  • Front Panel Display
  • Ready, Sensor Fault. Low Temp, Over Temp
Over Temp Protection
  • Front Panel Audible Alarm
  • Redundant Fail-Safe Relays
  • Independent Zone Shut-Off
Manual Standby
  • Adjustable, 20% – 70% of Set Point
Safety Timers
  • Front Panel Display
  • Auto-Standby, 0 – 5 hours
  • Auto-Off, 0 – 5 hours
Pump Ready / Lock-Out
  • Tank Temp Ready or
  • All Zone Ready
  • Ready Delay Timer with Front Panel Display

*Rates will vary depending on adhesive type and viscosity as well as system configuration.

DFS® Service Features

In-Service Clock
  • Front Panel Hour Meter
Controls
  • Plug-In Solid State Control Relays
Adhesive Supply Units
  • DFS Melt Tanks
  • DFS Pumps
  • DFS Motors
  • DFS Tank Heaters and RTD’s

DFS® (Designed for Serviceability) components can be easily removed and replaced without disassembly of any other ASU components.

Standard Attachments

Heated Hoses
  • Lengths up to 30 ft.
  • Core Diameters #6, #8, or #10
Handguns
  • Standard Hose Entry
  • Top Hose Entry
  • In-Line Hose Entry
Automatic Guns
  • Single or Multi-Valve
Gun Nozzles
  • Single or Multi-Bead
  • Ribbon or Slot
  • Spray Swirl

Accessories

Hose Support and Overhead Balancer Systems
Steel Carts with Castors
24-hour / 7-day Scheduler
Single Shot Timers
Multi-Function Pattern Control Timers